Experiment Menu

The experiment menu provides access to the features used to set-up and control experiments using the LabPro interface. Options from this menu include:

• Start Collection - begin the collection of data from the LabPro interface
• Store Latest Run - saves the most recently collected data so that it can be accessed later
• Clear Latest Run - deletes most recently collected data without saving
• Keep - store one data point at a time when collecting discrete rather than continuous data
• Extend Collection - increases the collection time by an additional 30%

• Connect Interface - connects LoggerPro to the LabPro interface by specifying the port to use
• Show Sensors - indicate which sensors are connected to the LabPro interface
• Data Collection - set the experimental conditions for collecting data

• Remote - prepares the LabPro interface for remote data collection (for field work without a PC)

• Calibrate - manually calibrate the sensor(s) connected to LabPro interface
• Save Calibration - save any manual calibrations
• Zero - resets the value reported by a sensor to zero
• Heat - not relevant to our system

Click here to return to the main page for Using LoggerPro.